Pressure Washing

A Clean Slate For Your Outdoors.

Walls, walkways, and outdoor living areas need different care. We’ll review the material, condition, and purpose of cleaning before defining the method.

Illustrative Florida Walkway After Surface Cleaning

A Palette From This Place

Color, texture, and the details that bring them together.
Room for a fresh perspective.

Start With The Details

A Scope That Fits Your Property.

Identify each surface, its approximate area, and any coating or existing damage.

01 / The surfaces

What We Can Review

  • Walls
  • Deck
  • Walkway
  • Driveway
  • Screen
  • Roof cleaning assessment
  • Gutters
  • Patio
  • Pool Deck

The Surface Sets The Method

Clean With A Plan. Not Just More Pressure.

A driveway, a painted wall, and a roof are not interchangeable. The material and its condition should guide the cleaning discussion.

Numbers With Context

Water Flow, Not A Promise Of Savings.

5–7gallons / minute

Typical wash-down sprayers

Equipment flow range in EPA guidance.

≤3gallons / minute

Typical pressure washers

Lower flow does not mean every surface should be pressure washed.

EPA WaterSense at Work, February 2025: typical equipment flow in commercial and institutional guidance. These are not measurements of our equipment or a promise of water savings. Job duration and method affect total use.

01 / Identify

Know the material.

Separate concrete, painted surfaces, screens, wood, and roofing in your request. Add photos of coatings, staining, and damaged areas.

02 / Protect

Asphalt roofing is different.

ARMA’s June 2024 bulletin warns that high-pressure washing can damage asphalt roofing and should not be used on it. Roof requests require a material-specific assessment.

03 / Review

Confirm the approach.

Discuss access, surrounding plants and fixtures, drainage, and current local water restrictions before scheduling. More pressure is not a universal measure of a better result.

Read The Context.

ARMA’s guidance concerns asphalt roofing, not every exterior material. Follow the applicable manufacturer’s instructions. The planning sequence above is a project discussion guide, not a DIY cleaning prescription.

Your Questions, Answered.

A little clarity before you start.

Which areas can I ask to have cleaned?

Walls, screens, gutters, walkways, driveways, decks, patios, and pool decks can be listed separately. Include the material, current condition, and reason for cleaning. A request is a starting point for review, not an assurance that every surface is suitable for the same pressure or cleaning method.

Can I include my roof?

You can request a roof-cleaning assessment and identify the roof type. Asphalt shingles must not be pressure washed. Add photos taken safely from the ground; do not climb onto the roof to measure or inspect it. The company reviews the material and appropriate approach before agreeing to work.

What should I mention about stains and existing coatings?

Describe the marks, their location, and any paint, sealant, or coating already on the surface. Include close-up and wider photos where practical. Cleaning results and methods depend on the material and condition; do not assume every stain can be removed or that an existing coating will remain unaffected.

Do local water restrictions affect the work?

Exterior cleaning depends on current local restrictions, the water source, and the purpose of the work. Provide the property location and discuss the planned task before scheduling. Rules can change, so the company needs to review current guidance rather than relying on a general year-round promise.

How should I prepare the area?

Tell us about vehicles, outdoor furniture, plants, pets, drainage, and any access limitations. Discuss what should be moved or protected before work begins. Also identify electrical fixtures, damaged surfaces, or areas of concern so the preparation and cleaning scope can be reviewed.

Can cleaning be combined with painting or sealing?

Yes. Add the related service to the same estimate and identify the surfaces involved. Cleaning, drying, preparation, and the later finish need to be planned together for the material and product. Combining requests does not automatically approve a particular method or sequence.

Make Yourself Comfortable

Accessibility Options

Choose the reading and motion settings that work for you. Your preferences are saved on this device.

System reduced-motion preferences are always respected. Use Tab to move between controls and Escape to close.